TXC7141 Conventional Manual Call Point

Product Category

TXC7141 Conventional Manual Call Point

1. The hardware circuit is stable, reliable, and unaffected by electromagnetic interference.
2. After the plastic dome is pressed, a special key shall be reset manually.
3. After the plastic dome is pressed, the manual button provides separate output contact to control other external equipment directly.
4. Plug-type structure is installed easily and reliably.

Overview

TXC7141 conventional manual call button has a beautiful structure and wiring is easy and reliable. After the fire is manually confirmed, press the plastic dome on the manual button to send the alarm signal to the controller. After the controller receives the alarm signal, the indicator in the corresponding area is on and an alarm sounds.

Technical Features

Operating Voltage	DC24V, 16-28V
Operating Current	Normal current: ≤20uA Alarm current: ≤30mA
Output capacity	rated DC30V/0.1A passive output contact signal and contact resistance ≤100mΩ
Type of starting parts	Reusable
Start type	Press plastic dome manually
Reset type	A special key is used to reset it. After an alarm is sent, open key cover of manual button and insert the key to rotate by 90°to the right
Wiring system	two-wire system, non-polarity
Operating environment	Indoors, temperature -10'℃ ~ +55'℃, relative humidity ≤95%RH, without condensation
Housing material and color	Plastic, red
Outline dimension	90.0mm×90.0mm×34.0mm (with base)
Weight	about 90g (with base)