Copyright © 2021 TANDA Development Pte. Ltd. All rights reserved.Privacy Policy.Site MapDesigned by
Feature and Benefits
• Self-check is available
• Auto/Manual mode
• The monitor can be muted automatically to eliminate audio return while the microphone is
used to broadcast
• As it receives the emergency signal, the power amplifier can automatically adjust audio to
preset position not controlled by the volume potentiometer, eliminating the influence of
human operation
• Automatically switching between the main power and the standby power
• Fault uploading
• Over heat protection
• Providing 24VDC off-set for local audio output line and line-checking module
• Communicate with TG7100 Broadcast Control Panel through RS485
Technical Specification
|
The Main Power |
220VAC（187V~242V）\50HZ |
|
Standby Power |
220VAC（187V~242V）50Hz |
|
Local Address |
1~10（binary code, no repeated codes） |
|
Input Resistance |
10KΩ |
|
Input Level |
775mV |
|
Stable Voltage Output |
120V |
|
Frequency Response |
80Hz～8KHz（90V～145V） |
|
Harmonic Distortion |
≤5% |
|
Noise Level |
＜37mV |
|
Dimension Lx W x H |
483.0mm×330.0mm×88.5mm |
|
Weight |
6.5 Kg |
|
Operating Temperature |
-10°C to +40°C |
|
Relative Humidity |
≤95% Relative Humidity, Non condensing |